Top quality
Fast delivery and really good products. I always enjoy coming back.
Left and right cutting with the same performance
- ideal for removing acrylic & gel
- highest wear resistance
- perfect heat dissipation
- very high material removal rate
- absolutely resistant to chemical disinfection
- an absolute "eyecatcher" in your studio
Carbide milling bit, conical with cutting tip and cross-cut teeth as well as special teeth for use by left and right-handers. The bit is characterized by very high resilience and durability. The cutter is excellently suited for professional use for removing gel and acrylic fillings with high efficiency. It is also often used for removing calluses. Can be used wet and dry.
Technical details:
Diameter: 6.8 mm
Overall length: 52 mm
Shank diameter: 2.35mm
Speed range: up to 20,000 rpm
Special RAINBOW coating
Coarseness: Extra Coarse
Application
The K0201XC carbide cutter is ideal for:
- Efficient removal of gel and acrylic models – Thanks to the cross-cut teeth, modeling layers are removed evenly and precisely.
- Working in both directions of rotation – Perfect for left-handers as well as for special applications with right or left rotation.
- Smoothing transitions and processing hybrid materials – Ensures an even and clean finish.
- Suitable for manicures and pedicures – Can also be used for processing artificial nails and removing calluses.
Application steps:
- Insert the cutter securely into the handpiece.
- Set the desired direction of rotation (clockwise or counter-clockwise).
- Start at a low speed and increase as needed.
- Work in even movements without applying pressure.
- Clean and disinfect the cutter after use.
Safety instructions
- Use only on artificial nails. Not suitable for natural nails.
- Wear safety glasses and a face mask to protect yourself from dust particles.
- Suitable for right and left-handers. Adjust the direction of rotation accordingly.
- Do not use on damaged nail beds. Avoid skin contact to prevent injuries.
- Avoid overheating. Work in even movements without pressure.
- Clean and disinfect the cutter after each use. Use suitable disinfectants for this purpose.
- For professional use only.
- Keep out of reach of children.
Manufacturer according to GPSR: Kemmer Präzision GmbH, Melitta-Bentz-Strasse 3, D-73529 Schwaebisch Gmuend, Telephone: +49(0)7171 1047 203
100% secure payment – your data is safe with us.
Left and right cutting with the same performance
- ideal for removing acrylic & gel
- highest wear resistance
- perfect heat dissipation
- very high material removal rate
- absolutely resistant to chemical disinfection
- an absolute "eyecatcher" in your studio
Carbide milling bit, conical with cutting tip and cross-cut teeth as well as special teeth for use by left and right-handers. The bit is characterized by very high resilience and durability. The cutter is excellently suited for professional use for removing gel and acrylic fillings with high efficiency. It is also often used for removing calluses. Can be used wet and dry.
Technical details:
Diameter: 6.8 mm
Overall length: 52 mm
Shank diameter: 2.35mm
Speed range: up to 20,000 rpm
Special RAINBOW coating
Coarseness: Extra Coarse
Application
The K0201XC carbide cutter is ideal for:
- Efficient removal of gel and acrylic models – Thanks to the cross-cut teeth, modeling layers are removed evenly and precisely.
- Working in both directions of rotation – Perfect for left-handers as well as for special applications with right or left rotation.
- Smoothing transitions and processing hybrid materials – Ensures an even and clean finish.
- Suitable for manicures and pedicures – Can also be used for processing artificial nails and removing calluses.
Application steps:
- Insert the cutter securely into the handpiece.
- Set the desired direction of rotation (clockwise or counter-clockwise).
- Start at a low speed and increase as needed.
- Work in even movements without applying pressure.
- Clean and disinfect the cutter after use.
Safety instructions
- Use only on artificial nails. Not suitable for natural nails.
- Wear safety glasses and a face mask to protect yourself from dust particles.
- Suitable for right and left-handers. Adjust the direction of rotation accordingly.
- Do not use on damaged nail beds. Avoid skin contact to prevent injuries.
- Avoid overheating. Work in even movements without pressure.
- Clean and disinfect the cutter after each use. Use suitable disinfectants for this purpose.
- For professional use only.
- Keep out of reach of children.
Manufacturer according to GPSR: Kemmer Präzision GmbH, Melitta-Bentz-Strasse 3, D-73529 Schwaebisch Gmuend, Telephone: +49(0)7171 1047 203
100% secure payment – your data is safe with us.