Instructions for Airbrush Baby Boomer Spray:

Step 1: Shape the nails with a 100/180 grit file. Then carefully remove the cuticles with a rosewood stick by gently pushing them back.

Step 2: Next, mattify the nail surface with a polishing file or buffer. Remove the resulting nail dust with a cellette soaked in cleaner. If necessary, a thin layer of primer can be used to degrease the nails.

Step 3: Apply a thin layer of base coat and cure it under an LED lamp according to the table. Do not wipe the nails afterward.

Step 4: Apply a thin layer of UV nail polish color and cure it under the LED lamp. Repeat the process with a second thin layer.

Step 5: While the second layer is still wet, spray the nail powder spray onto the nail: Hold the applicator from above to the nail tip and, depending on the desired effect, gradually increase the angle when spraying the powder. Then cure under the LED lamp.

Step 6: Now seal the UV manicure with a top coat and cure it under the LED lamp. After curing, wait about 30 seconds and then remove the sticky layer with a cellette soaked in cleaner.

Step 7: For additional care, a nail oil should be used daily.

!ATTENTION!:

For professional use only. Avoid skin contact. Avoid eye contact. Please read the instructions carefully before use. In case of an allergic reaction, stop use immediately. Keep out of reach of children.

UV nail polish should be protected from natural sunlight, otherwise the product may cure.

Please note that the colors shown in the product card images may differ slightly from the actual product colors. The reason for these differences lies in the individual settings of your computer monitor.

Please note that for hygiene reasons, returns of UV nail polishes, gels, and liquids are excluded.

Manufacturer according to GPSR: Cosmo Group Sp. z o.o. Jasielska 10A, 60-476 POZNAŃ, POLAND, E-mail: export@cosmogroup.pl