Rubber Polybase is a more durable and, above all, healthier alternative to hybrid polishes. Depending on the condition of the nail plate, it can replace the base coat and thus shorten the duration of the manicure. Thanks to the rubber content, Polybase is more durable and resistant to damage, so you can enjoy beautiful nails for as long as possible

APPLICATION:

1. Prepare the nail plate as usual: manicure, shape

2. Remove excess grease and moisture from the nail plate with Didier Lab Dehydrator

3. Apply a thin layer of Rubber Base or Primer, depending on the requirements of the nail plate

4. Cure the Rubber Base in the lamp for 60 seconds

5. Apply 1-2 coats of Rubber Polish Polybase to the nail, carefully moving the brush over the surface - just like applying hybrid polish

6. Cure with LED 60 sec. / UV 120 sec. - lamp wavelength 395-405 nm

7. Apply the selected top coat for hybrid polishes

8. Cure it in the lamp

Rubber Polish Polybase can be used on acrylic gels and gels.

IMPORTANT!

Did you know that the number of wavelengths in the lamp (nm) affects the curing of the product?

Make sure your lamp is strong enough.

The most suitable wavelength is 395-405 nm. If your lamp has a shorter wavelength, polymerize Polybase twice.

Removal:

Cutter or Acetone

We remove with a delicate yellow cutter.

If the nail had a light color - do not remove it, leave a thin layer of Polybase and then apply a new selected color.

Ingredients: Polyurethane-57, Hydroxypropyl Methacrylate, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Glycol HEMA-Methacrylate, Silica, Bis(Methacryloyloxyethyl) Phosphate, PEG-9 Dimethacrylate, p-Hydroxyanisole, Hydroquinone, CI 77891, CI 15850, CI 77492

!ATTENTION!:

For professional use only. Avoid skin contact. Avoid eye contact. Please read the instructions carefully before use. In case of an allergic reaction, discontinue use immediately. Keep out of reach of children.

UV nail polish must be protected from natural sunlight, otherwise the product may harden.

Please note that the colors shown in the product card images may differ slightly from the actual colors of the products. The reason for the above differences lies in the individual settings of your computer monitor.

Manufacturer according to GPSR: Laboratoires Didier SAS, 25 rue Keller, 75011 – Paris, E-mail: kontakt@didierlab.de